The Enterprise at the Edge.

The M3-SE-VSVR5-P is a high-powered computer platform with 16 physical cores and up to 128 GB of RAM, supporting multiple virtual machines in a single small-form-factor module.  An integrated enterprise-grade RAID controller servicing 10 bays of solid-state disc (SSD) drives makes the M3-SE-VSVR5-P compatible with commercially available hypervisors and hyper-converged solutions such as VMware ESXi and VSAN applications.

The M3-SE-SVR4, powered by an Intel® Core™ Skylake i7-6822 or Xeon® E3-1505L processor, supports a single operating system or multiple virtual machines in a single module.  Featuring 32 GB of RAM, dual DisplayPort, two SSD bays, and up to 10Gigabit Ethernet connectivity, the M3-SE-SVR4 is capable of supporting a wide range of applications required by users operating at the tactical edge,

The M3-SE-SVR4-ISR is an ideal platform for small, mobile tactical fly-away Intelligence, Surveillance, and Reconnaissance kits. The module contains an analog SDI input card to accept video from ISR ground stations and is compatible with commercial video encoder software.  Offering best-in-class CPU, RAM, and storage capabilities, with an Intel Core i7 processor, two SATA hard drive slots, and up to 32GB of RAM, the M3-SE-SVR4-ISR has been engineered from the ground up to deliver the performance ISR users require.

The M3-SE5 contains a Cisco 6300 Embedded Services Router (ESR) and Cisco 3300 Embedded Services Switch (ESS) that support secure/non-secure environments in a single person-carry solution.  Ideal for communications on the move, the combined router and switch module reduces size, weight, power, and complexity, and lowers total cost of ownership.

The M3-SE-SW24G is a small-form-factor, stackable switch module that provides an unmatched 100 watts of POE power to support Power over Ethernet (POE) capability.  When paired with the M3-SE-POE module, the M3-SE-SW24G can support up to 400 watts of additional power, providing enterprise-class POE+ capability across all 24 Gigabit ports.

The M3-SE-TFOCA enables an M3-SE stack to patch into an existing military-grade fiber-optic network.  The module features two separate TFOCA-II connectors that seamlessly convert Gigabit Ethernet to tactical fiber.

The M3-SE-PA-P provides seamless, reliable battery power backup in the event of external DC power loss.  Compatible with a standard IEC electronic cord for AC power or a commercially available LEMO connector for DC input power, the M3-SE-PA-P accepts a wide range of input power levels to meet mission requirements.

The M3-SE-PA module provides regulated and conditioned power to other M3-SE modules for up to 3+ hours in the event of external DC power loss.  Designed to sit at the bottom of an M3-SE stack and support a wide range of DC inputs to charge the batteries, the module ensures seamless, reliable battery backup.

The M3-SE-PA2-R provides immediate failover capability when external power is lost, preventing downtime and data corruption during critical missions.  With a remote on/off switch port to cut power to an entire equipment stack, the M3-SE-PA2-R accepts 10 to 30 VDC inputs and includes an M3-DPS7 desktop power supply for 100 to 240 VAC operation, making it usable worldwide.

The M3-SE-TPA1 provides regulated 12 VDC power for external devices. When combined with M3-SE power modules, including M3-SE-PA, M3-SE-PA2, M3-SE-PA-P, the power ports remain active even if AC/DC input power is lost. The module has a connector on the bottom side to accommodate pass-through power from other M3-SE modules.

The M3-SE-MPA2 provides regulated 12 VDC and 24 VDC power for external devices. When combined with M3-SE power modules, including M3-SE-PA, M3-SE-PA2, M3-SE-PA-P, the power ports remain active even if AC/DC input power is lost. A pass-through connector and four bushings on top of the modules allow other M3-SE modules to be stacked on top of the M3-SE-MPA2.

The M3-SE-ACDC module’s primary function is to provide 200W of DC power to the M3-SE system/stack from an AC power source. The M3-SE-ACDC also provides additional AC convenience outlets and USB DC charging ports for external devices. The module includes a Power Passthrough connector to facilitate stacking.

Designed to complement the M3-SE-SW24G, the M3-SE-POE provides an additional 400 watts of PoE capability by leveraging external AC power sources, while also providing two additional AC outlets and remote on/off switching capability.